- Project Architect:
- Loft Architecture
- Project Builder:
- Contract Control Services Pty Ltd
- Barrymore Road Reserve Pavilion, Melbourne VIC Victoria
Barrymore Road Reserve Pavilion Hume Council Melbourne Victoria
Everbright E610 Ice White was used recently as a translucent verandah at Barrymore Road Reserve Pavilion for Hume Council in Melbourne, VIC.
For this new development E610 was used flat and our panels were set at a 3 degree pitch. E610 free spanned 3.6mtr incorporating Locking System LS2.1. Locking system LS 2.1 simply means there is 1 aluminium locking bar required out of every 6 chambers. See design loads, which shows you in more detail the different locking systems available.
These panels were extruded, and supplied in one complete 3.6mtr length and in 600mm wide configurations. Total project area: 130sqm
Installation time for this project was two days, and there were two tradesmen available on site.
The design brief was for a product that could minimize structural requirements, be fully trafficable and have a long life span.
Our system was ideally suited for a project of this nature, due to E610's free span capabilities, durability, and panel strength.
For developments of this nature E610's additional benefit, is that in the unlikely event of students climbing on the roof or even falling from a big height, our polycarbonate system will not break or the joints separate. Making E610 one of the strongest translucent materials available in the world today.
Several other key factors were for a product that was rapid to construct, therefore keeping disturbance down to a minimum.
The Everbright E610 panels only needs to be joined every 600mm on site this makes the installations process very rapid.
Our 74mm polycarbonate system gives a unique visual appearance and modern uniformed look making use of all the natural light available.
All these factors made our system a excellent and obvious solution for this development.
Ice White was the colour selected due to a 55 percent light transmission for visible light and a thermal performance of R value 1.85.
E610 LS2.1 Weight and dead load calculations;
Locking System LS2.1 = 9 kg/sqm with a dead load of 0.90kN/sqm.
See design loads, which shows you in more detail the different locking systems available.
E610 polycarbonate panels incorporate as standard detailing an excellent safety factor. All loading criteria are based on 0.75kN/sqm and a 50% safety factor as part of a standard specification detailing.
Makrolon 1243 is the material used in our polycarbonate roofing system, which is part of the worldwide Bayer Group.
Everbright E610 comes with a manufacture's worldwide 10 year warranty and the panels have a life expectancy in excess of 35 years.
Our polycarbonate system give a seamless and continuous line, with no steel frame work spoiling the visual effect. E610 Integral locking bars hide the aspect of where a panel starts and where it finishes, so it becomes a continuous system giving a uniformed and conformed design feature. Creating an architectural flare, that isn't possible with any other polycarbonate system available on the market. Our system only needs to be secured with washer and screw fixings provided to both the lower and higher end of the panels, all the joints are self sealing once the integral locking bar is fitted. Other systems would necessitate the need for a framed grid work support system across the entire roof.
Everbright E610 major advantages at a glance:
- Rapid installation
- Superior free span (see design loads)
- Can be extruded to a maximum 20.5mtr
- Minimal additional structure required with our system
- Strongest translucent material in the world (74mm profile)
- 100% fully trafficable
- Passed the AS1562.3-2006 sand bag test
- Impact resistance
- Intruder resistance
- Cyclone rated
- Superior thermal/ acoustic performance
- Long life span
- Coextruded UV protection layer
- Australian manufactured
- Unique jointing arrangement
- Self cleaning dome shape
- Light weight product
This project is located at Barrymore Road Reserve Pavilion, Melbourne VIC, Victoria
The project can be viewed should site visits be required and adequate notice is given.