Project Architect:
Toon Architects
Location:
The St Josephs High School, Corner Nolan & Bourgoyne Street, Kerang Victoria

St Josephs High School Kerang Translucent Covered Area Victoria

Modern uniform look

This recently completed project will help you understand the benefits of our 74mm polycarbonate system. Everbright E610 Opal was used recently at St Josephs High School Kerang Victoria. This project incorporated 1 x large Everbright E610 covered translucent area, where our panels were set at a 5 degree pitch. The Everbright panels incorporating locking System LS1. See design loads, which shows you in more detail the different locking systems available. These panels were supplied in complete lengths of 2mtr lengths and in 600mm wide configurations.

The project area was 2mtr x 20mtr long and in 600mm wide configurations. Total project size 40sqm. Installation time for this project was one day and there was two tradesmen available on site to do the associated works.

The design brief for this development was for a modern looking translucent product, that could minimize structural requirements and have a long life span. The client's specifications were for a product that was self cleaning, impact resistance, had superior thermal and acoustic performance characteristics. Another key factor was for a product that was rapid to construct, therefore keeping disturbance down to a minimum.

The Everbright E610's increased free span capabilities, made our polycarbonate system an excellent choice for this project giving the desired effect, as it is one of the strongest translucent materials available in the world today. For developments of this nature Everbright additional benefit, is that in the unlikely event of students climbing on the roof or even falling from a substantial height, our polycarbonate system will not break or the joints separate.

Our premiére product enhanced this development with its clean modern look and provided a comfortable environment for all the staff and pupils at the school. Our 74mm polycarbonate system gives a unique visual appearance and modern uniformed look making use of all the natural light available.

Opal was the colour selected due to a 65% percent light transmission for visible light

The Everbright E610 panels only needs to be joined every 600mm on site this makes the installations process very rapid.

Our polycarbonate system give a seamless and continuous line, with no steel frame work spoiling the visual effect. Everbright E610's integral locking bars hide the aspect of where a panel starts and where it finishes, so it becomes a continuous system giving a uniformed and conformed design feature. Creating an architectural flare, that isn't possible with any other polycarbonate system available on the market. Our system only needs to be secured with washer and screw fixings provided to both the lower and higher end of the panels, all the joints are self sealing once the integral locking bar is fitted.

Makrolon 1243 is the material used in our polycarbonate roofing system, which is part of the worldwide Bayer Group.

Everbright E610 comes with a manufactures worldwide 10 year warranty and the panels have a life expectancy in excess of 35 years.

The construction process is very simple and is less time consuming to install on site. We can advise that there was a significant cost saving on the structure requirements with our system on this project.

Everbright E610 polycarbonate panels incorporate as standard detailing an excellent safety factor. All loading criteria are based on 0.75kN/sqm and a 50% safety factor as part of a standard specification detailing.

Project Architects: Toon Architects

Everbright E610 major advantages at a glance:

  • Rapid installation
  • Superior free span (see design loads)
  • Can be extruded to a maximum 20.5mtr
  • Minimal additional structure required with our system
  • Strongest translucent material in the world (74mm profile)
  • 100% fully trafficable
  • Passed the AS1562.3-2006 sand bag test
  • Impact resistance
  • Intruder resistance
  • Cyclone rated
  • Superior thermal/ acoustic performance
  • Long life span
  • Coextruded UV protection layer
  • Australian manufactured
  • Unique jointing arrangement
  • Self cleaning dome shape
  • Light weight product

This project is located at The St Josephs High School, Corner Nolan & Bourgoyne Street, Kerang, Victoria
The project can be viewed should site visits be required and adequate notice is given.

The Installation Visually

  • Unique appearance

    Unique appearance

  • 65% light transmission

    65% light transmission

  • High quality finish

    High quality finish

  • Simple construction

    Simple construction

  • Good thermal qualities

    Good thermal qualities